Yippee for Yana: Hot Foil Backgrounds Made Easy!

Yippee for Yana

Hi friends, welcome to the latest edition of Yippee for Yana with the always amazing and creative Yana Smakula! Be sure to read on and watch the video for more info and enjoy!

Hi everyone, this is Yana Smakula! In this episode, I will show you how to create hot foil backgrounds with the help of your non-background glimmer plates. Think of this as repeat pattern stamping, but instead of using clear or red rubber stamps we are going to use hot foil plates. I have a few tips to share in this video to make the foiling process go smoothly and quickly.

I love this Mermaids Forever Glimmer Plate by Jane Davenport and I know it will make a fabulous background for some nautical cards when paired with Simon’s “Your Light” stamp set.

The plate, of course, is smaller than an A2 card, it can be used on both portrait and landscape cards, but you’ll need to foil it several times on the background to have one continuous pattern.

This is rather easy to do with the help of low tack tape. I am foiling on Neenah Solar White 110 lb cardstock today. To foil the background I added a piece of wide low tack tape to create a hinge to attach my glimmer plate to the paper, next, using grid lines of my work surface I align the cardstock and also align the die on top of it. Also, I’m starting at the top and moving down making sure the tape will not be placed over the already foiled section.

Once aligned I press the washi tape strip in place to secure my plate on the paper. This will give me a top row of these mermaid scales or waves. I’m using Skybright foil to foil this piece and to foil the entire background – it makes up for a beautiful sea. Using a sharp pair of scissors I cut my foil to a strip, I eyeball it and try to match it in width to the width of my glimmer plate and once cut simply slide it under the plate. The only significant thing here is to try and cut the foil on a straight line. Using scissors with long blades helps.

Meanwhile, my glimmer hot foil machine has been heating up and is now hot and ready to foil. I’m sending the sandwich slowly through my die cutting machine and back and returning the platform back to the docking station so that it remains hot for the next round.

Now I need to remove the glimmer plate, peel the foil, reposition the plate and add foil all while the glimmer plate is hot. So what do you do? You can wait for the plate to cool off and that might take several minutes, or you can use this trick.

Wear a glove!

I have one of those curling irons that doesn’t have a clamp and so there’s a glove included with the iron to be able to wrap the hair strand around the curling wand and hold it in place while it curls it. The glove protects the hand from the heat. I can use it here when doing hot foiling to handle the hot glimmer plate and also protect my hand from all heat.

Holding the paper with my non-gloved hand I remove the glimmer plate with my gloved hand and re-position in on the paper aligning with the previously foiled design to have one continuous background for my card. Having the glove on this makes it very easy to move the glimmer plate and position it where I need it.

I repeat the process several times to foil the entire background.

I also have another background done in a similar way but using several colors of foil for an ombre look – Cobalt Blue, Teal, Skybright and Prism.

To turn these backgrounds into cards I trimmed them down slightly, and to create little nautical scenes I also die-cut circles from vellum and cardstock strips from red cardstock. I white heat embossed images and sentiments and using foam adhesive I assembled these cards.

I also hid little pieces of foam adhesive squares under small sequin or enamel dot embellishments to add more support and more adhesive to the vellum circles.

Be sure to watch the video below to see how the cards were created!

WATCH THE VIDEO

SUPPLIES

Simon Says Clear Stamps YOUR LIGHT…
[ SSS ]
JDGL-003 Spellbinders MERMAIDS…
[ SSS ]
JDGL-008 Spellbinders SHOW PONIES…
[ SSS ]
GLS-001 Spellbinders GLIMMER HOT FOIL…
[ SSS ]
Spellbinders DEEP SEA Die Cutting and…
[ SSS ]
GLF-032 Spellbinders PRISM Glimmer Foil
[ SSS ]
GLF-020 Spellbinders COBALT BLUE…
[ SSS ]
GLF-015 Spellbinders SKYBRIGHT…
[ SSS ]
GLF-009 Spellbinders TEAL Glimmer Foil
[ SSS ]
Neenah Classic Crest 110 LB SMOOTH…
[ SSS ]
Simon Says Stamp Card Stock 100#…
[ SSS ]
Hero Arts EMBOSS WHITE DETAIL…
[ SSS ]
Simon Says Stamp Embossing Ink Pad…
[ SSS ]
Precision Heat Embossing Tool Hero…
[ SSS ]
Scrapbook Adhesives 1/4 INCH 3D 308…
[ SSS ]
cardmaking blog grab bag

Blog Candy Alert!! Follow our blog via email and comment on this post for a chance to win special blog candy!

  1. Anew foiling machine? Just when you think you have it all. The cards are lovely and I already follow by email.

  2. You make using a foil machine look so easy! The card is perfect for summer, especially if you have some friends who love to sail!

  3. Wow, this is SO pretty! I have a Minc machine and am not sure if a hot foil plate works in there the same as it does in the Spellbinders system, but I’m excited to find out and perhaps recreate something like this. Love the colors!

  4. Wow, the way you’ve lined up the different colours of foil is seamless – the backgrounds look so beautiful! Great tip about using a heat-protective glove.

Leave a Reply to Angela Cancel reply

Your email address will not be published.